Activated Carbon Filter / Dry Scrubber
- Simple Operation – No additional Chemicals Required
- Available in Metallic & Non-Metallic Constructions
- Ideal for VOCs, Odor, and Solvent Fumes
Product Overview
Engineered for Clean and Odour-Free Emissions
Product USP
Why TNBi’s Activated Carbon Filter Scrubber Excels?
Performance
High adsorption capacity for VOCs
Engineered for long service life
Safety
No Moving parts
Safe for use with toxic and flammable vapours
Design Flexibility
Multiple media bed depths for longer service life
Available in metallic and non-metallic variants
Installation Layout
Use Cases
Ideal for Mixed Emissions and Extreme Heat
Cement Kilns & Clinker Coolers
Removes dust, SO₂, NOx and acid fumes in one go.
Non-Ferrous Metal Smelting
Handles high-temp gases from aluminium, copper, and zinc processing.
Industrial Waste Incinerators
Captures fine particulate, heavy metals, VOCs, and acidic gases.
Power Plants & Boilers
Controls dust and flue gases from biomass and fossil-fuel combustion.
Chemical Process Exhausts
Multi-stage solution for particulate, acid/base, and solvent emissions.
Multi-Stage Chemical Processing
Supports cascade neutralisation across multi-gas inputs.
Challenges vs TNBi's Solutions
How It Solves Your Top Scrubber Challenges
“Too many pollutants, need multiple systems”
Cyclone + Venturi + Packed Bed + Demister: all in one unit
“Our exhaust is over 900° C”
Withstands ≤ 1100°C inlet temp without needing pre-cooling
“Corrosion, clogging, and noise issues”
Abrasion/corrosion-proof internals + low-noise operation
Case Studies
Proven in the Field
Proven Performance in Pharma
TNBi Solution: Replaced the legacy scrubber with an SS304 Venturi-based unit featuring:
- Horizontal gas entry
- Open recirculation tank
- Adjustable venturi
- Higher liquid flow rate
- Foam-resistant spray system
Result
- Zero shutdowns in 2 years
- ₹1.2Cr saved in maintenance + fines
Tell Us About Your Gas Stream
Industry Application
Serving Multiple Sectors with Tailored Solutions
Food & Beverage Processing
Petrochemical & Refinery Units
Chemical & Fertiliser Plants
Wastewater Treatment Plants
Pharmaceutical Manufacturing
Pulp & Paper Industry
Paint & Coatings Facilities
Technical Specifications Table |
|
|---|---|
| Parameter | Specification |
| Gas Flow Capacity | Up to 60,000+ Nm³/hr (based on configuration) |
| Suitable Gas Types | Acidic, Alkaline, VOCs, Mixed |
| Material of Construction | FRP, PP, PVC, SS 316L, Hastelloy C-22 |
| Pressure Drop | 25–45 mbar (stage dependent) |